König DL-QUAKE250 Especificações descarregar pdf (Página 6)

6

Replace the main fuse:

1. Unplug the mains cable from the output socket.

2. Open the fuse holder and replace the fuse with one of the same type. The fuse rating is listed on

the rating label.

SPECIFICATIONS:

• Multi-color

• 12 Rotating gobo patterns

• Gobo shake function

• DMX-512/4 channels

• Standalone auto mode

• Sound activated

• Master/slave function

• Menu display

• Fan-cooled

• Adjustable mounting bracket

• Lamp: ELC 24V/250W GX5.3 (included)

• Power supply: 230 V AC, 50/60 Hz

• Dimensions (WxHxD): 365x195x365mm

• Weight: 4.3kg

TROUBLESHOOTING:

Problem Probable cause Solution

One or more xtures are

completely dead.

No power to the xture.

Make sure that cables are plugged

in and power is switched on.

Main fuse blown. Replace fuse.

Fixture is working correctly

but no light output.

Broken or worn out lamp. Install new lamp.

Fixtures reset correctly

but all respond erratically

or not at all to controller.

Controller not connected. Connect controller.

XLR pin-out of controller does

not match pin-out of rst xture

on link (polarity is reversed).

Install a phase-reversing cable

between controller and rst xture

on link.

Fixtures reset correctly but

some respond erratically

or not at all to controller.

Bad data link connection.

Inspect connections and cables.

Correct poor connections. Repair

or replace damaged cables.

Data link not terminated with

120 Ohm termination plug.

Insert termination plug in output of

last xture on link.

Incorrect xture addressing. Check DMX addresses.

One of the xtures is

transmitting as a master.

Check all xture settings.

One of the xtures is defective.

Bypass one xture at a time (unplug

both DMX connectors and connect

them directly together) until normal

operation is regained. Defective

xture has to be serviced by a

technician.

DL-QUAKE250_A5.indd 6 2009.9.1 9:33:30 AM

1 2 3 4 5 6 7 8 9 10 11 ... 76 77

Comentários a estes Manuais

Sem comentários